全國服務熱線:
濟南濟柴環能燃氣發電設備有限公司
聯系電話:羅總18653152416
服務熱線:0531-62325028
聯系地址:中國(山東)自由貿易試驗區濟南片區孫村街道經十東路33688號章錦綜合保稅區聯東U谷科創中心5號樓101
一、合金尾氣發電機組工作原理
1、 Working principle of alloy tail gas generator set
合金尾氣發電機組是一種以天然氣為燃料,通過燃燒產生熱能,進而轉化為機械能驅動發電機發電的設備。天然氣與空氣混合后進入氣缸,在火花塞點火的作用下燃燒,燃燒產生的能量推動活塞運動,帶動曲軸旋轉,最終使發電機發電。
Alloy tail gas generator set is a device that uses natural gas as fuel, generates heat energy through combustion, and then converts it into mechanical energy to drive the generator to generate electricity. After mixing with air, natural gas enters the cylinder and burns under the action of spark plug ignition. The energy generated by combustion drives the piston to move, drives the crankshaft to rotate, and ultimately generates electricity for the generator.

二、導致放炮的原因
2、 The reason for the shooting
混合氣問題
Mixed gas problem
混合氣過稀
The mixture is too dilute
調整混合器不當可能造成混合氣過稀,從而引起放炮現象。例如在調試過程中沒有設置混合比例,就可能導致這種情況。
Improper adjustment of the mixer may cause the mixture to become too dilute, leading to the phenomenon of firing. For example, if the mixing ratio is not accurately set during debugging, it may lead to this situation.
車輛長期未保養,進氣直管漏氣,會使額外的空氣進入,造成混合氣過稀,進而引發放炮。就像一些使用時間較長且缺乏維護的合金尾氣發電機組,進氣部件老化磨損后就容易出現這種情況。
If the vehicle is not maintained for a long time and the intake pipe leaks, it will allow additional air to enter, causing the mixture to become too lean and leading to explosions. Just like some alloy exhaust gas generators that have been in use for a long time and lack maintenance, this situation is prone to occur after the intake components age and wear.
車輛長時間行駛在山路、坑凹不平的路面上,有可能使空濾上下罩蓋錯位,大量空氣竄入氣缸內,造成混合氣過稀,最終導致放炮。
Long term driving of vehicles on mountain roads and uneven roads may cause misalignment of the upper and lower covers of the air filter, resulting in a large amount of air entering the cylinder and causing the mixture to become too lean, ultimately leading to explosions.
混合氣過濃:如果天然氣供應系統出現故障,例如噴油器故障導致天然氣噴射量過多,使得混合氣過濃,燃燒不完全,也可能引發放炮現象。
Excessive mixture: If there is a malfunction in the natural gas supply system, such as a fuel injector failure causing excessive natural gas injection, resulting in an excessive mixture and incomplete combustion, it may also lead to the phenomenon of firing.
點火系統故障
Ignition system malfunction
點火能量不足,如高壓線電阻過大,會影響點火效果,導致燃燒不正常而放炮。
Insufficient ignition energy, such as high resistance of high-voltage lines, can affect the ignition effect, leading to abnormal combustion and firing.
點火線圈損壞,無法提供足夠的電壓來產生穩定的火花,使得天然氣不能充分燃燒,也可能造成放炮。
The ignition coil is damaged, unable to provide sufficient voltage to generate stable sparks, resulting in incomplete combustion of natural gas and potentially causing explosions.
火花塞故障,例如火花塞積碳、電磨損等,會影響點火的及時性和穩定性,從而導致放炮。
Spark plug faults, such as carbon buildup and electrode wear, can affect the timeliness and stability of ignition, leading to firing.
三、導致熄火的其他相關因素
3、 Other related factors that cause engine stalling
燃油供應方面
Regarding fuel supply
氣路堵塞是導致熄火的一個因素。例如氣瓶管路被調整螺釘堵塞和高壓濾清濾芯破損,會阻礙天然氣的正常供應,使發動機因缺乏燃料而熄火。
Air blockage is a factor that causes engine stalling. For example, if the gas cylinder pipeline is blocked by adjustment screws and the high-pressure filter element is damaged, it will hinder the normal supply of natural gas, causing the engine to stall due to a lack of fuel.
供油不及時或供油中斷也會引起熄火。比如合金尾氣發電機組在運行過程中,如果天然氣供應系統的某個部件出現故障,導致天然氣無法持續供應到氣缸內,發動機就會逐漸無力直至熄火。
Delayed or interrupted fuel supply can also cause engine stalling. For example, during the operation of an alloy exhaust gas generator set, if a component of the natural gas supply system malfunctions, causing the natural gas to be unable to be continuously supplied to the cylinder, the engine will gradually lose power until it stalls.
機械故障方面
Regarding mechanical malfunctions
氣缸漏氣,燃燒時混入過多空氣,使氣缸內的天然氣濃度太低,引起爆鳴聲后進而熄火。
The cylinder leaks air, and excessive air is mixed in during combustion, causing the concentration of natural gas in the cylinder to be too low, resulting in a knocking sound and subsequent flameout.
發動機內部的零部件磨損,如活塞、曲軸等部件磨損嚴重,會影響發動機的正常運轉,可能導致熄火。
The wear and tear of internal components of the engine, such as pistons and crankshafts, can affect the normal operation of the engine and may lead to engine stalling.
四、放炮熄火的綜合原因
4、 Comprehensive reasons for extinguishing the cannon
合金尾氣發電機組放炮熄火可能是多種因素綜合作用的結果。例如,混合氣過稀可能同時導致放炮和隨后的熄火。點火系統故障既可能引發放炮現象,又可能因為燃燒不穩定最終導致熄火。氣路堵塞首先會影響燃料供應,造成熄火,而在堵塞過程中也可能導致混合氣比例失調引發放炮。機械故障如氣缸漏氣,一方面使混合氣比例異常引起放炮,另一方面又因為發動機工作狀態惡化而導致熄火。
The explosion and shutdown of the alloy tail gas generator set may be the result of a combination of multiple factors. For example, a mixture that is too lean may result in both firing and subsequent stalling. A malfunction in the ignition system may cause both firing and eventual flameout due to unstable combustion. Blockage of the gas path will first affect the fuel supply, causing flameout, and during the blockage process, it may also lead to an imbalance in the mixture ratio and trigger firing. Mechanical failures such as cylinder leaks can cause abnormal mixture ratios leading to blowouts, as well as engine stalling due to deteriorating working conditions.
本文由 合金尾氣發電機組 友情奉獻.更多有關的知識請點擊 http://m.50gaoxiao.com/ 真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.
This article is a friendly contribution from the alloy tail gas generator set For more related knowledge, please click http://m.50gaoxiao.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.

掃一掃了解更多

掃一掃了解更多